Need help with 2 MFPs that won't pull to the inventory.
I have 2 MFPs giving me trouble. The fist one is a SGR-50 or Kyocera KM 5050. I can the IP and the scanner testing passes on snmp public, and smnpv2 but it does not show up in my inventory. The other...
View ArticleNeed help with 2 MFPs that won't pull to the inventory.
I would go and wipe out the machines IP stacks and rebuild them. I have had that issue with may different types of MFD. For some reason something gets stuck in the momory on the NIC and can cause...
View ArticleNeed help with 2 MFPs that won't pull to the inventory.
Thanks Now I need to figure out how to do that. Any help would be appreciated.
View ArticleNeed help with 2 MFPs that won't pull to the inventory.
Thanks Adam6558 but that did not work I wiped both machines back to factory settings and still have the same issue.
View ArticleNeed help with 2 MFPs that won't pull to the inventory.
Did you go into the service mode and reset the nic or the admin mode to reset the nic. Im not sure about the models you have but on canon, sharps, and Konica monilta's their is a deferance on how the...
View ArticleNeed help with 2 MFPs that won't pull to the inventory.
I will check to see if the Kyocera's have a nic in the service mode.
View ArticleNeed help with 2 MFPs that won't pull to the inventory.
Went into service mode and wiped both machines back to factory default. I had to rebuild them from scratch still having the same issue.
View ArticleNeed help with 2 MFPs that won't pull to the inventory.
What application are you using to trap the PJL commands for the SNMP community pool? Also what does the RUI say does that work?
View ArticleNeed help with 2 MFPs that won't pull to the inventory.
I'm just using the default settings in Spice works under network scanning. NOt using any traps. Just the defaults for snmp public. I think my issue may be that the machines in question are on a...
View ArticleNeed help with 2 MFPs that won't pull to the inventory.
So you have 44 machine on a VLAN and 42 report correctly. If that is the case then the machines are most likley the fault. Try reloading the machines firmware and/or OS.
View Article
